Commercial Solutions

Commercial Applications

Air pollution levels within the indoor environment can be up to 5 times higher than outdoor levels and people spend more than 90% of their time indoors. Additionally, poor Indoor Air Quality (IAQ) ranks as one of the top five environmental risks to public health, but is often overlooked by key decision makers.

FilterPro Services Canada offers both particulate and molecular air filtration products designed to improve the IAQ within commercial office buildings and educational institutions. Our filters are used to remove particulate and odors created inside buildings from human activity as well as from off gassing of furniture, wall coverings, new flooring, new paint, waste disposal rooms and the like. Within the outdoor air supply, our filters purge molecular and particulate pollutants generated by vehicle exhaust, construction sites and roadways. Installing the proper air and/or molecular filtration products will ensure a safe working environment for tenants, staff and visitors to commercial buildings and educational institutions.

Commercial Services

PARTICULATE FILTRATION


From commercial Class A office towers and shopping malls to restaurants and educational facilities, FilterPro Services Canada will meet and exceed your expectations to supply and install particulate and molecular filtration products with utmost emphasis on safety and professionalism. Whether you have another company already providing this service or have only just considered the benefits for your facility, contact us today to discuss a custom service solution that’s best suited to your facility.


MOLECULAR (GAS-PHASE) FILTRATION


FilterPro Services Canada offers full service installations of molecular filtration products within the commercial sector. Whether the need is to contain nuisance odors from garbage rooms, neighborhood restaurant exhaust, loading dock diesel emissions or penthouse Heli-Pads, we have the trained service personnel and expertise to provide and maintain your molecular filtration systems during regular office hours or after. Providing safe, professional, cost effective service is job one.


BASELINE FILTRATION AUDITS


Whether its a new commercial building with no baseline data to create a filtration management program or to fine-tune an existing one, FilterPro Services Canada offers thorough audits of your filtration systems to develop a baseline along with recommendations to drive improved air quality and/or reduced long-term operation and maintenance costs. Complete the online form or give us a call today.


RETROFIT SOLUTIONS


Most things mechanical can be fixed with time and money. Sometimes the time it takes to remove and replace tired and worn out filtration systems is time better spent by our clients HVAC or mechanical maintenance crews doing more critical tasks. In the days of decreased manpower and increased workloads, many commercial clients rely on FilterPro Services Canada to supply and install the components required to upgrade old and inefficient filtration systems to high performance systems with reduced energy consumption for lower long-term operating costs and improved air quality. Only when one considers the high cost of poor filtration do we learn that its time and money well spent to retrofit a weakened or antiquated system with one that delivers improved air quality, reduced energy consumption or both.

Today’s high performance filtration products can last over 50% longer than many technologies from decades ago thereby reducing landfill waste by over 50%. Let us show you how a retrofit solution could reduce your labour, material and landfill costs by over 50%....our children will all be thankful you did!


- Contact Us

Commercial Products

WIRE SUPPORT PANELS (WSP)


  • Internal welded wire frames prevents filter collapse or degradation in high humidity or high dust loading conditions.
  • Single Ply WSP’s are designed for light to moderate applications such as those used on fancoils or heat pumps.
  • 2-Ply MERV 7 WSP’s are used in moderate to heavy dust loading conditions. Suited to anywhere a conventional 2" pre-filter is used at present.
  • 3-Ply MERV 8 WSP’s are used in moderate to heavy dust loading conditions on their own or as pre-filters to high efficiency secondary filters.
  • Self sealing design
  • Reduced storage and disposal versus cardboard framed filters

WIRE SUPPORT CUBES (WSC)

The WSC is offered in a variety of different medias; single ply, 2-ply or 3-ply construction in depths from 12 inches to 24 inches.

PLEATED PANEL FILTERS

Available in 1", 2" and 4" depths in MERV 8, MERV 10 and MERV 13 efficiency

POCKET FILTERS

RIGID CELL


  • MERV 11, MERV 13 and MERV 14 efficiencies and constructed of aluminized steel
  • Can be recycled whereby only the spent filter media is sent to landfill
  • Commonly used in either side access housings or front access holding frames using a wide variety of pre-filters depending on application and site requirements

ASHRAE CARTRIDGE


  • Constructed of heavy gauge aluminized steel and offered in both Single Header (SH) and Double Header (DH) configurations.
  • Available in three efficiencies: 65% (MERV 11), 85% (MERV 13) and 95% (MERV 14).
  • The ASHRAE Cartridge is the workhorse of secondary filters and commonly used in commercial, industrial, medical and institutional HVAC systems to ensure high performance under difficult operating conditions.

FP MINI PLEAT

The FP Mini Pleat design incorporates 193 square feet of high efficiency media within a standard 24x24x12 filter utilizing the 4V configuration. This extended media surface area creates a lower resistance to air flow resulting in reduced energy consumption and extended life. The unique, inherently stable 4V filter design distributes air evenly across the filter. It is rated at continuous airflow rates up to 3000 CFM.


  • Available in MERV 11, MERV 14, MERV 15 and MERV 16 efficiencies
  • Constructed of wet-laid micro glass media to eliminate downstream dust and fiber shedding
  • Plastic frame creates an exceptionally strong yet lightweight filter
  • Low initial pressure drop and high dust holding capacity
  • Dual direction media for front or reverse mount installations
  • Built-in handle eases transportation and installation
  • Longer filter life with lower replacement and maintenance costs
  • Sustainable component for LEED/Green Building initiative

FP Carbon


  • Contaminant gases are commonly found as byproducts of combustion brought into a buildings supply air from air intakes near loading docks, busy streets or rooftop Heli-Pads. Garbage rooms, recycling bins and numerous other environmental factors including regional forest fires can benefit from FP Carbon cartridges to help mitigate these challenging air quality issues.

HVAC & PROCESS FILTER HOUSINGS

  • Wide range of filter housings available from 500 CFM to over 40,000 CFM
  • Galvanized Steel, Double Wall Aluminum or 304 Stainless Steel
  • Single stage particulate, dual stage particulate, single or multi-stage carbon, HEPA, Bag-In Bag-Out (BIBO) containment housings and isolation dampers.
  • Numerous options available and we can customize to meet specific site requirements. Contact us today to discuss your project.